ipconfig not working?

1 Name: Anonymous 2021-04-29 03:59

For some reason the ipconfig/ release and renew function are not working at all in the windows cmd function. I have reset winsock, reinstalled all my drivers, and troubleshooted my network adapters.
Picrel is the error message I get
I am asking because two devices I have are interfering with each other
Any help would be GREATLY appreciated
2 Name: SuperFratBoyExtreme 2021-04-29 04:02
Get a Mac faggot
3 Name: Anonymous 2021-04-29 07:26
Serious advice: try it with a Linux live image. if you get the same problem then it is hardware failure or an issue with the router. If not, then lucky you.
4 Name: Anonymous 2021-04-29 07:30
change the ip in windows settings
5 Name: Anonymous 2021-04-29 07:32
I don't have any other IP addresses to use
6 Name: Anonymous 2021-04-29 07:36
try connecting your network to one of the other nics, see if you can release/renew that one. that should narrow it down.

Leave this field blank: